HDDExpert - Bilan de santé pour vos disques durs

magellan

Modérâleur
Staff
[fixed]0x01 Raw Read Error Rate 0 100 62 000000000000
0x02 Throughput Performance 0 100 40 000000000000
0x03 Spin Up Time 1 ms 235 33 001100000001
0x04 Start/Stop Count 860 100 0 00000000035C
0x05 Reallocated Sector Count 0 100 5 000000000000
0x07 Seek Error Rate 0 100 67 000000000000
0x08 Seek Time Performance 0 100 40 000000000000
0x09 Power-On Hours Count 5385h 88 0 000000001509
0x0A Spin-up Retry Count 0 100 60 000000000000
0x0C Power Cycle Count 859 100 0 00000000035B
0xB7 SATA Downshift Count 0 100 0 000000000000
0xB8 End-to-End Error Detection Count 0 100 97 000000000000
0xBB Uncorrectable Error Count 16908288 100 0 017701020000
0xBC Command Timeout 772 100 0 0014006A0304
0xBE Temperature - Airflow (Case) 36°C 64 45 000017270024
0xBF G-Sense Error Rate 11777 54 0 000000002E01
0xC0 Power-Off Retract Cycle 1179666 100 0 000000120012
0xC1 Load/Unload Cycle Count 3421 100 0 000000000D5D
0xC4 Reallocated Event Count 0 100 0 000000000000
0xC5 Current Pending Sector Count 0 100 0 000000000000
0xC6 Off-line Scan Uncorrectable Count 0 100 0 000000000000
0xC7 UltraDMA CRC Error Rate 0 100 0 000000000000
0xDF Load/Unload Retry Count 0 100 0 000000000000 [/fixed]
C'est étrange, la quantité d'erreurs ne me semble pas cohérente (HDD de pc portable)

à revoir (selon moi)
- Clics possibles sur les deux icones de temps d'usage (le sablier) et l'icone de cycles, mais sans usage en terme d'ergonomie
- Pas de tri possible sur les colonnes des données smart
- Renvoi sur un site marchand en cliquant sur les GROS boutons de l'interface. Déroutant de prime abord
- Pas d'explication complémentaire sur ce que sont les différentes valeurs lues. Une colonne "About" aiderait grandement à la compréhension.
 

Kyle_Katarn

Grand Maître
Merci pour ton feedback ?

Qu'est ce qui ne te semble pas cohérent ?

Bonne idée pour le tri :
Pour les indications tu les as en tooltip en laissant la souris sur une ligne
 

magellan

Modérâleur
Staff
Cette ligne
0xBB Uncorrectable Error Count 16908288 100 0 017701020000
Je ne vois pas d'où ça sort... mais je ne dis aps que c'est faux.

Sinon, les tooltips c'est bien, avoir le texte dans une colonne (surtout que l'appli peut être redimensionnée), je trouverais ça plus parlant (question ergonomie uniquement ;))
PS: coller des tooltips sur les boutons aussi, juste pour la cohérence de l'ihm

J'ai failli oublier: changer l'icone sur le HDD avec une sorte de flèche verte pour décrire un "refresh", puisque le bouton semble être prévu pour ça.
 

Kyle_Katarn

Grand Maître
OK, je vais voir ça !

Pour tes UEC, ça peut être un défaut de disque, un problème de connectique, d'alim.... il faut surtout surveiller si ça augmente dans le temps.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.11.2 (Released 2014-12-31)
========================================



- 0002721: [Bug] Unknown 0xB2 SMART attributes (from a Plextor device) (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.12 (Released 2015-05-17)
======================================



- 0002848: [New Feature] Progress bar while loading (Kyle_Katarn) - resolved.
- 0002171: [Refactoring] Multithreaded SMART data access (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.13 (Released 2015-08-20)
======================================



- 0003091: [Refactoring] Direct google search for specification (Kyle_Katarn) - resolved.
- 0003069: [New Feature] Shall log if "portable" version is used (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.13.1 (Released 2015-11-08)
========================================



- 0003228: [New Feature] ALSR (Address space layout randomization) (Kyle_Katarn) - resolved.
- 0003268: [Bug] Windows 10 support in log file (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.13.3 (Released 2016-03-12)
========================================



- 0003496: [Bug] POH / cycle pictures displayed even if no data (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.13.4 (Released 2016-04-07)
========================================



- 0003612: [Refactoring] CTxxxxx with no manufacturer detected shall use "Crucial" (Kyle_Katarn) - resolved.
- 0003092: [Bug] Some Seagate wrong identification (Kyle_Katarn) - resolved.
- 0003542: [Bug] Incorrect Manufacturer for seagate "ST500DM002 1BD142" (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.13.5 (Released 2016-06-30)
========================================



- 0003651: [Bug] Bug: Program not displaying temperature for SSD in top area of window (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.14 (Released 2016-08-31)
======================================



- 0002274: [New Feature] Check for updates at startup (Kyle_Katarn) - resolved.
- 0003610: [New Feature] Update detection (SUMo lite) (Kyle_Katarn) - resolved.
- 0003867: [Refactoring] Upgrade of internal JEDI Libraries JCL v2.7 -> v2.8 (6000) JVCL v3.49 -> v3.50 (2016-08-04) (Kyle_Katarn) - resolved.
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.14.1 (Released 2016-12-31)
========================================



0004050: [Refactoring] Notification of "up-to-date" version when manually check using menu item (Kyle_Katarn)
0004184: [Bug] Update of internal ICS library from 8.06 to 8.34 (Kyle_Katarn)
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.14.2 (Released 2017-05-26)
========================================



0004214: [New Feature] ICS shall be set in NO_DEBUG_LOG (Kyle_Katarn)
0004317: [Bug] Switching to dual monitor to single and restarting lead to invisible UI (Kyle_Katarn)
 

Kyle_Katarn

Grand Maître
HDDExpert - 1.15 (Released 2017-09-01)
======================================



0004414: [New Feature] Menu item for "Bug report" and "Change Log" (Kyle_Katarn)
0003776: [Bug] Wrong language file used (Kyle_Katarn)
0004449: [Bug] Incorrect Manufacturer / Model identification for "THNSN5256GPUK NVMe TOSHIBA 256GB" (Kyle_Katarn)
0002886: [New Feature] Log "filtered" SMART data (Kyle_Katarn)
0004447: [Bug] Logging of '[PhysicalDrive%d]' elements missing (Kyle_Katarn)
0002406: [Bug] SMART data detected but not displayed (Kyle_Katarn)
0002883: [Bug] Empty report for Crucial BX100 SSD (Kyle_Katarn)
0004446: [Refactoring] "no drive detected" shall be logged as Error, not Verbose (Kyle_Katarn)
 
Vous devez vous inscrire ou vous connecter pour répondre ici.
Derniers messages publiés
Statistiques globales
Discussions
730 098
Messages
6 717 055
Membres
1 586 282
Dernier membre
Yannick3553
Partager cette page
Haut