L'installation du modem ne pose pas apparement de problème. Cela dit la configuration c'est tout autres choses. J'ai répondu au hazar afin que tu puisses voir chaque question. De plus le dossier /dev/modem n'est pas créer pas plus que /dev/ttySHSF0
Merci d'avance
---------------------------------------------------------------
[root@localhost hsflinmodem-5.03.03.L3]# hsfconfig
Linux HSF softmodem drivers, version 5.03.03.L3mbsibeta02110301
WARNING: this is an EXPERIMENTAL BETA VERSION of the HSF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hsf/LICENSE for details.
Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more information, go to:
Vous devez être
connecté pour voir les liens.
Should we attempt to automatically configure your hardware? [yes] yes
/usr/sbin/hsfconfig: line 207: lspci: command not found
No supported modem device found.
Is the modem presently installed in your system? [yes] yes
1) Conexant HSF 56k HSFi Modem (rev 1).
2) None of the above
Which PCI communication controller is your HSF modem? (1-2) 1
/usr/sbin/hsfconfig: line 290: lspci: command not found
Please enter your modem's PCI Vendor ID []: ABCD
Please enter your modem's PCI Device ID []: ABCD
1) /etc/hsf/inf/linux_ali_smartmc.inf
2) /etc/hsf/inf/linux_athens.inf
3) /etc/hsf/inf/linux_hsfi.inf
4) /etc/hsf/inf/linux_hsf.inf
5) /etc/hsf/inf/linux_intel_smartmc.inf
6) /etc/hsf/inf/linux_smarthsf.inf
7) /etc/hsf/inf/linux_via_smartmc.inf
8) None of the above
Which INF file would you like to use with your HSF modem? (1-8) 3
Selected PCI VendorID=ABCD DeviceID=ABCD
and INF file /etc/hsf/inf/linux_hsfi.inf
Automatically guessed country (using timezone): "FRANCE"
Configuring modem for country: "FRANCE"
You can change this setting later with the command "hsfconfig --country"
This package does not contain pre-built modules suitable for your system:
Distribution: Mandrake-9.0
Kernel arch: i686
Kernel version: linux-2.4.19-16mdk
Trying to automatically re-compile the modules..
(this requires a C compiler and proper kernel sources to be installed)
Where is the linux source build directory that matches your running kernel?
[/lib/modules/2.4.19-16mdk/build]
Re-compiling HSF modules for kernel 2.4.19-16mdk, using source directory
/lib/modules/2.4.19-16mdk/build. Please wait..
Re-compilation and installation of HSF modules succeeded.
Your HSF modem should now be accessible as /dev/ttySHSF0
[root@localhost hsflinmodem-5.03.03.L3]#